SKU
TFM3.1200

1200C 3-Zone Top-Open Tube Furnace w/ Kanthal Heating Elements

Price $9,990.00

CUSTOMIZE YOUR PRODUCT

Wishlist

 

Ai TFM3 series 3-zone tube furnaces feature the famous Kanthal (Sweden) resistance wire as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature is controlled by Eurotherm (UK) digital multi-segment controller. Furnace housing is built with double-layer steel and two cooling fans inside keep the furnace body temperature low.Furnace tube is sealed by stainless steel vacuum sealing flanges, it can be used under vacuum and other gases condition. This tube furnace is an ideal tool for sintering all types of materials/chemical. Great for labs or college scientific research use.

These furnaces have built-in interface to a computer. We provide connection cable, adaptor and software that can be used to control the temperature and parameters of the furnace, all from your PC! You can also save a temperature curve for record or study purposes.


Safety features

  • Furnace overheat protection cuts off power when temperature is over the desired range.
  • Thermocouple protection cuts off power when the thermocouple is broken or malfunctioned.
  • Temperature variation protection cuts off power when the difference between actual temperature and target temperature is off the desired range. (refer to controllers manual)
  • Power failure protection resume furnace operation right after the point of failure when power is back up.
  • Stainless steel flange support makes sure the tube and flanges are secure and in their absolute position, it also longer the life of the tube.

Warning! NEVER fill furnace with explosive gases, including Hydrogen, Carbon Monoxide and Methane.

 

 

 

 

How to Install an Across International Tube Sealing Flange

Specifications

Specifications

 Electrical requirements  208-240VAC, 50/60 Hz, single phase
 Tube material   Quartz
 Min. working temperature  Ambient
 Max. working temperature  Zone1/Zone2/Zone3: 1200°C
 Max. constant working temperature  Zone1/Zone2/Zone3: 1100°C
 Constant working temperature under vacuum  Zone1/Zone2/Zone3: 1000°C
 Rated vacuum pressure  0.001 Pa / 0.0075 millitorr / 0.00001 mbar
 Rated positive pressure  0.02 MPa / 150 torr / 3 psi
 Refractory lining  Mitsubishi (Japan) high quality 1600 grade fiber alumina
 Heating element type  Zone1/Zone2/Zone3: Kanthal (Sweden) A1 2.0 resistance coil wire
 Thermocouple type  Zone1/Zone2/Zone3: K
 Temperature controller  Eurotherm (UK) digital multi-segment controller
 Max heating rate  20°C/min    
 Recommended heating rate  10°C/min    
 Heating zone length  Zone1: 8 inches Zone2: 8 inches Zone3: 8 inches
 Constant temperature zone length        Zone1: 4 inches Zone2: 4 inches Zone3: 4 inches
 Temperature controller precision  +/- 1°C
 Vacuum sealing flange kit  Stainless steel vacuum sealing flanges with one vacuum gauge,     
 two valves and four thermal ceramic blocks.
 Compliance  ETL tested to UL and CSA standards (optional), CE

 

Size comparison

 Tube size (OD x length)  60mm x 1300mm  100mm x 1300mm  150mm x 1300mm
 Maximum output  1.5 kW x 3  2 kW x 3  2.5 kW x 3
Standard Packages

TFM3.1200 (60x1300mm)/(100X1300mm) Standard Package

 Part description

 Quantity

 Part image

TFM3.1200 top-open tube furnace  1 pc

Stainless steel vacuum sealing flanges w/ pressure gauge  1 set


Quartz tube  2 pcs


 Clamp, O-ring, and Valve (Pre-installed on flange)
1 set

 

 Flange O-rings 8 pcs


 Analog flow meter  1 pc


 Stainless steel hook  1 pc


Alumina thermal block

2 pairs

 

 Thermal gloves  1 pair

 Spare UL Fuses (15A) 2 pcs

 Insulation Strip
2 pcs

 Crucibles 5 pcs

 USB/RS485 computer interface kit  1 set

 Allen Keys 1 pc


 Furnace and Shimaden controller manual 2 pcs


 

TFM3.1200 (150x1300mm)/(200x1300mm)/(250x1400mm) Standard package

 Part description

 Quantity

 Part image

TFM3.1200 top-open tube furnace  1 pc

Stainless steel vacuum sealing flanges w/ pressure gauge  1 set


Quartz tube
 2 pc


Clamp, O-ring, and Valve (Pre-installed on flange)
1 set

 

 Flange O-rings 8 pcs


 Analog flow meter  1 pc


 Stainless steel hook  1 pc


Quartz thermal block

2 pairs

 

 Thermal gloves  1 pair

 Spare UL Fuses (15A) 2 pcs

 Insulation Strip
2 pcs

Square Crucible (80 mm x 80 mm) 5 pcs

 USB/RS485 computer interface kit  1 set

Bolts Set (Bolt, lock washers and two washers)
9 sets


 Allen Keys 2 pcS


Furnace and Eurotherm or Shimaden controller manual 2 pcs


 

Overview

 

Ai TFM3 series 3-zone tube furnaces feature the famous Kanthal (Sweden) resistance wire as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature is controlled by Eurotherm (UK) digital multi-segment controller. Furnace housing is built with double-layer steel and two cooling fans inside keep the furnace body temperature low.Furnace tube is sealed by stainless steel vacuum sealing flanges, it can be used under vacuum and other gases condition. This tube furnace is an ideal tool for sintering all types of materials/chemical. Great for labs or college scientific research use.

These furnaces have built-in interface to a computer. We provide connection cable, adaptor and software that can be used to control the temperature and parameters of the furnace, all from your PC! You can also save a temperature curve for record or study purposes.


Safety features

  • Furnace overheat protection cuts off power when temperature is over the desired range.
  • Thermocouple protection cuts off power when the thermocouple is broken or malfunctioned.
  • Temperature variation protection cuts off power when the difference between actual temperature and target temperature is off the desired range. (refer to controllers manual)
  • Power failure protection resume furnace operation right after the point of failure when power is back up.
  • Stainless steel flange support makes sure the tube and flanges are secure and in their absolute position, it also longer the life of the tube.

Warning! NEVER fill furnace with explosive gases, including Hydrogen, Carbon Monoxide and Methane.

 

 

 

 

How to Install an Across International Tube Sealing Flange

Copyright © 2008-2022 Across International. All rights reserved.