SKU
RTP1200

RTP1200 Fast Sintering Furnace With Halogen Light (Call for Quote)

Price $0.00

CUSTOMIZE YOUR PRODUCT

Support
Have a Question? Ask our experts!

Product Video

Videos

Please call us for the price (Quote), thank you.

 

 



RTP1200 furnaces (Rapid Thermal Processing) with Halogen light heating elements feature a chamber with Mitsubishi (Japan) high-quality grade 1900 alumina fiber insulation and 12 pcs Halogen light tubes. A dual-wall steel housing helps minimize heat loss to exterior surface.

 

Furnace operation is controlled by 50-segment Eurotherm (UK) digital controller with a built-in communication port, allowing the user to connect to a PC for remote control and monitoring of the furnace.

 

 

Safety

  • Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller's manual) or when the thermocouple is broken or malfunctions.
  • Power failure protection resumes furnace operation right after the point of failure when power is reestablished.
  • Limit switch turns off furnace once top is open.

 

Warning! NEVER fill furnace with explosive gases, including Hydrogen, Carbon Monoxide and Methane.

 

Specifications

Specifications

Power Input 208-240 AC, 50/60 Hz single phase, 12 KW Max.
Heating Elements 12 pcs Halogen light tube
Heating Zone 10" length with 4" constant temperature zone within +/-5ºC uniformity
Working Temperature 600ºC – 700 ºC Max for Continuous
1100ºC Max. for < 10 minutes
1000ºC Max. for < 20 minutes
800ºC Max. for < 120 minutes
Max. Heating Rate 50ºC/sec
Cooling Rate Max. Cooling: 60ºC/min (Under vacuum: 200 m-torr), 117ºC/min (under atmospheric pressure)

Lowest Cooling: 10 ºC / minute
Flanges Water Cooled (submersible water pump included, chiller optional)
Thermocouple K type
Temperature Controller Eurotherm 3504 • 50 segments programmer (ramp and dwelling)
• +/- 1 ºC temperature control accuracy
• PC communication port
Quartz Tube Dia 4 inch × 23-inch length
Dimensions 40 × 20 × 30(L× W × H)
Standard Packages

Part description

Quantity 

RTP 1200 fast sintering furnace unit 1 pc
Quartz process tube, 580 mm length, 100 mm OD 2 pc
Water-cooled stainless steel vacuum sealing flange set with pressure gauge 1 set
Clamp, O-ring, and valve assembly (pre-installed) 1 set
Spare flange O-rings 5 pc
Circular quartz heating spiral with mounting hardware 1 pc
Stainless steel hanging hook 1 pc
Alumina thermal insulation block for 90 mm OD tube 2 pc
High-temperature protective gloves 1 pair
Crucible holder assembly 1 pc
USB / RS485 computer communication kit 1 set
Allen key tool 1 pc
80A UL-listed Bussmann fuse 2 pc
Type-K thermocouple sensor 1 pc
Thermal support plate 1 pc
Extra mounting bolts 12 pc
Push-to-connect adapter (10 mm to 16 mm tubing) 1 pc
Submersible cooling pump with hose barb fitting 1 pc
16 mm tubing 1 pc
10 mm tubing 1 pc
Furnace and temperature controller manual 1 pc
Eurotherm USB OR Shimaden CD for software 1 pc

 

 

Overview

Please call us for the price (Quote), thank you.

 

 



RTP1200 furnaces (Rapid Thermal Processing) with Halogen light heating elements feature a chamber with Mitsubishi (Japan) high-quality grade 1900 alumina fiber insulation and 12 pcs Halogen light tubes. A dual-wall steel housing helps minimize heat loss to exterior surface.

 

Furnace operation is controlled by 50-segment Eurotherm (UK) digital controller with a built-in communication port, allowing the user to connect to a PC for remote control and monitoring of the furnace.

 

 

Safety

  • Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller's manual) or when the thermocouple is broken or malfunctions.
  • Power failure protection resumes furnace operation right after the point of failure when power is reestablished.
  • Limit switch turns off furnace once top is open.

 

Warning! NEVER fill furnace with explosive gases, including Hydrogen, Carbon Monoxide and Methane.

 

Copyright © 2008-2023 Across International. All rights reserved.