The store will not work correctly in the case when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Electric motor and controller model is ETL certified to UL and CSA standards
Peer reviewed model (pneumatic motor and controller) is approved to be used with Acetone, Ethanol, Heptane, Hexane, Isopropyl Alcohol, Methanol, and Pentane.
CAUTION!
Across International is not responsible for caustic chemical related damage to the stainless steel reactor internal and external parts and components.
Never fill circulated heaters or chillers with water, always use Ai or manufacturer's recommended thermal fluid
Always leave ample fluid space in heater reservoir to allow fluid heat expansion
Always keep system vacuum passage or drain valve open when heating up circulation jackets
Always make sure your vacuum pumps and diffusion pump fluid is clean and within limits
Impellar/Stirrer Options
Name
Stirrer Type A
Anchor
Stirrer Type B
Piched Marine
Stirrer Type C
Pitched Blade
Stirrer Type D
Square Blade
Stirrer Type E
Anchor with Upper Pitched Blade
Stirrer Type F
Dual Pitched Blade
Stirrer Type G
Triple Pitched Blade
Stirrer Type H
Double Helix
Huber Unistat 915w adapters, tubing and fluid for Ai 300L stainless steel reactors for Winterization
P/N 6479 x 6 DW Therm (-90 to 200) 10L
P/N 6461 x 2 90 degree M30 X 1.5 (male) to M30 X 1.5 (female)
P/N 6427 x 2 Hose MT-350-2-M30x1,5 (f)
P/N 13255 x 2 M30 X 1.5 (male) to 1" NPT (male)
For additional CS200 to cool the Unistat 915w (optional and not included in package as standard)
P/N 16859 x 2 2 meter braided hose (G1" female)
P/N 10979 x 2 G 1" male to a G 3/4" female adapter
The Unistat 915w is a water-cooled chiller that must be coupled with a cool water source or paired with a water chiller in order to operate. If an air-cooled chiller is required please speak with your sales representative before purchase.
220V, 50/60Hz, 1~Phase, 200 watts, 1/4 HP Rotation: 450 rpm max. (±8%) Starting torque: 3.0 N.m Rated torque: 1.54 N.m Built-in gearbox ratio: 3:1 to 180:1 Controller: Delta, UL listed
Pneumatic stirring motor
- Power: 1/4 HP - Rotation: 450 rpm max. (±8%) - Compressed air pressure range: 30 to 80 psi (0.2 to 0.55 MPa) - Working temperature: -10C to +70C - For constant use: set rpm to 80% of maximum rpm - Motor lubricant
Mobil Grease XHP 222, Lithium Complex, Blue, NLGI Grade 2
- For safety purpose, detach compressed air supply when not in use, left un-attended or at night - Do not run motor un-loaded - Set Air Adjuster to minimum at initial run, make sure motor is working properly, before increasing CFM - Before inspecting unit, stop the motor and detach air supply. Do NOT inspect unit when motor is in action. - Make sure exhaust port/hole is clear from any debris or blockage - Check every 2-3 days: Air Lubricant, Air Filter water drain
Port configuration
Lid: 12" triclamp Center motor port: 3" triclamp Drain port: 6" triclamp Drain port on/off valve: 2" triclamp Vacuum port: 1.5" triclamp Condenser recirculating fluid port: 1/2" female NPT Vessel jacket recirculating fluid port: 1" female NPT 50L/100L collection tank lid: 6" triclamp x 1, 1.5" triclamp x 4
Option 1: 20L x 2, 316L stainless steel, with manifold Option 2: 50L x 1, 304 stainless steel, with dolly (15.5" diameter, 23.5" height, 30" with dolly) Option 3: 100L x 1, 304 stainless steel, with dolly (15.5" diameter, 43" height, 49.5" with dolly)
Material
All wetted parts 316L grade stainless steel on main reactor body Rest of reactor in 304 grade stainless steel, including motor coupling, triclamps, temp/pressure gauge adapters, and chassis.
Main Condenser
Style: shell and tube heat exchanger Number of tubes: 110 Condensing area: one sq meter
Pressure
Ultimate vacuum level: 1 Torr
Temperature range
-55°C to +250°C (-67°F to +482°F)
Temperature sensor/display
Regular: BOOST.TTA.0101, -200C to 480C, 50.5 clamp Explosion proof: BOOST.TTA.0102, -200C to 480C, 50.5 clamp
Sealing gasket
Food grade Viton
Main Mounting Frame
Heavy duty 2.5 x 2.5" 304 grade stainless steel, mounted on four casters
Drain port ground clearance
Drain port: 19.5 inches Drain valve: 14 inches
Shipping Weight (Unit)
770 Lbs / 990 Lbs
Shipping Dimensions
48 x 38 x 88" (WxDxH)
Assembled Dimensions
38" x 47" x 81" (WxDxH) without 20L receiving flasks assembled
51" x 47" x 81" (WxDxH) with 20L receiving flasks assembled
Compliance
ETL tested to UL and CSA standards C1D1 peer review by PSI (optional)
Power Cord with plug (may be hardwired to unit or with a detachable plug)
1 pc
User's manual
1 pc
HUBER Unistat 915w Standard Package
Part description
Quantity
Part image
HUBER Unistat 915w -90°C to 250°C with Pilot ONE
1 pc
Huber adapters, tubing and fluid P/N 6479 x 6 DW Therm (-90 to 200) 10L P/N 6461 x 2 90 degree M30 X 1.5 (male) to M30 X 1.5 (female) P/N 6427 x 2 Hose MT-350-2-M30x1,5 (f) P/N 13255 x 2 M30 X 1.5 (male) to 1" NPT (male)
Electric motor and controller model is ETL certified to UL and CSA standards
Peer reviewed model (pneumatic motor and controller) is approved to be used with Acetone, Ethanol, Heptane, Hexane, Isopropyl Alcohol, Methanol, and Pentane.
CAUTION!
Across International is not responsible for caustic chemical related damage to the stainless steel reactor internal and external parts and components.
Never fill circulated heaters or chillers with water, always use Ai or manufacturer's recommended thermal fluid
Always leave ample fluid space in heater reservoir to allow fluid heat expansion
Always keep system vacuum passage or drain valve open when heating up circulation jackets
Always make sure your vacuum pumps and diffusion pump fluid is clean and within limits
Impellar/Stirrer Options
Name
Stirrer Type A
Anchor
Stirrer Type B
Piched Marine
Stirrer Type C
Pitched Blade
Stirrer Type D
Square Blade
Stirrer Type E
Anchor with Upper Pitched Blade
Stirrer Type F
Dual Pitched Blade
Stirrer Type G
Triple Pitched Blade
Stirrer Type H
Double Helix
Huber Unistat 915w adapters, tubing and fluid for Ai 300L stainless steel reactors for Winterization
P/N 6479 x 6 DW Therm (-90 to 200) 10L
P/N 6461 x 2 90 degree M30 X 1.5 (male) to M30 X 1.5 (female)
P/N 6427 x 2 Hose MT-350-2-M30x1,5 (f)
P/N 13255 x 2 M30 X 1.5 (male) to 1" NPT (male)
For additional CS200 to cool the Unistat 915w (optional and not included in package as standard)
P/N 16859 x 2 2 meter braided hose (G1" female)
P/N 10979 x 2 G 1" male to a G 3/4" female adapter
The Unistat 915w is a water-cooled chiller that must be coupled with a cool water source or paired with a water chiller in order to operate. If an air-cooled chiller is required please speak with your sales representative before purchase.