SKU
BeadBath-14L

Lab Armor Bead Bath 14L

Price $1,464.59

CUSTOMIZE YOUR PRODUCT

Wishlist
THE DESIGN BEHIND THE Bead Bath

Lab Armor Bead Baths were specifically designed to work with Lab Armor Beads to optimize their performance.                    

Uniform Temperatures

It’s all about a good design.  With Bead Bath designed specifically for beads, temperatures are consistent and uniform everywhere in the bath. Thermal uniformity is  +/-1.0 at 37ºC.

Always On

It’s always on, ready to use. You never need to turn it off. There is nothing to evaporate. It’s just like a trusty always-on incubator. Unlike a standard bead-filled water bath, Bead Bath allows you to achieve a new set temperature quickly, without long warm-up delays, so you can make fast adjustments.

 

 

Stays Clean

Contaminated samples and reagents result in distorted data and unpredictable outcomes. Reduce the risk of contamination, achieve reproducible results and have greater confidence in your work.

Stays Organized

Unlike water baths that require racks, floats, and bottleneck weights, Bead Bath naturally holds things in place without accessories. So no more floating accidents.

 

Why use a bead bath?

Thermal beads (in place of oil or water) reduce the dangers of fire, contamination, and lack of temperature control. They’re the perfect option for heating vessels in a constant, stable environment with a broad temperature range of -80°C to +180°C.

Traditional water or oil baths cannot retain heat for long, and they create condensation, which can not only be messy in the lab but can also cause bacterial growth.

Waterless laboratory bead baths reduce the chances of contamination, have a quick heat-up time, and provide much higher thermal retention than water. Plus, bead baths never evaporate which improves temperature performance and saves energy.

 

 

 

Lab Armor Bead Bath vs. Water Bath

  Bead Bath Water Bath Oil Bath Sand Bath
High Thermal Efficiency Yes Yes Yes No
Microbial/Biofilm Resistant Yes No Yes Yes
Cross-contamination Resistant Yes No No No
Minimal Cleaning Yes No No Yes
No Refilling Yes No No Yes
Rack & Accessory Free Yes No No Yes
Angled Incubation Possible Yes No No Yes
Constant Volume Yes No Yes Yes
Non-Corrosive Yes No No Yes
Broad Temperature Range (-80 to 180C) Yes No Yes Yes
Non-water tight Vessel Compatibility Yes No No Yes
No Evaporation (Instrument Burn-Out Protection) Yes No Yes Yes
Always On (No Warm Up) Yes No No Yes
Mobile or Field Use Compatible Yes No No No
Non-combustible Yes Yes No Yes

 

 

Specifications

Specification

EXTERIOR DIMENSIONS (W × D × H)

15.9 × 18.5 × 8.5
(404 mm × 470 mm × 216 mm)

INTERIOR DIMENSIONS (W × D × H)

12 × 12.1 × 6
(305 mm × 307 mm × 152 mm)

VOLUME

0.5 cu.ft. (14 L)

UNIT WEIGHT (without beads) 18.0 lbs (5.9 kg)
OPERATING TEMPERATURE RANGE Amb +5C - 80C
TEMPERATURE UNIFORMITY - MIDRANGE 1.0 °C
TEMPERATURE STABILITY - MIDRANGE 0.1 °C
CONTROLLER TYPE Digital
DISPLAY RESOLUTION 0.1 °C
POWER VOLTAGE , FREQUENCY AND CURRENT

100-120 VAC, 50/60 Hz, 4.5 Amps

Available in 220 Volt

MAX HVAC LOAD

2.45K BTUs/hr

SAFETY CERTIFICATIONS

UL 61010-1, EN 61010-1, CSA 61010-1, CE

Overview
THE DESIGN BEHIND THE Bead Bath

Lab Armor Bead Baths were specifically designed to work with Lab Armor Beads to optimize their performance.                    

Uniform Temperatures

It’s all about a good design.  With Bead Bath designed specifically for beads, temperatures are consistent and uniform everywhere in the bath. Thermal uniformity is  +/-1.0 at 37ºC.

Always On

It’s always on, ready to use. You never need to turn it off. There is nothing to evaporate. It’s just like a trusty always-on incubator. Unlike a standard bead-filled water bath, Bead Bath allows you to achieve a new set temperature quickly, without long warm-up delays, so you can make fast adjustments.

 

 

Stays Clean

Contaminated samples and reagents result in distorted data and unpredictable outcomes. Reduce the risk of contamination, achieve reproducible results and have greater confidence in your work.

Stays Organized

Unlike water baths that require racks, floats, and bottleneck weights, Bead Bath naturally holds things in place without accessories. So no more floating accidents.

 

Why use a bead bath?

Thermal beads (in place of oil or water) reduce the dangers of fire, contamination, and lack of temperature control. They’re the perfect option for heating vessels in a constant, stable environment with a broad temperature range of -80°C to +180°C.

Traditional water or oil baths cannot retain heat for long, and they create condensation, which can not only be messy in the lab but can also cause bacterial growth.

Waterless laboratory bead baths reduce the chances of contamination, have a quick heat-up time, and provide much higher thermal retention than water. Plus, bead baths never evaporate which improves temperature performance and saves energy.

 

 

 

Lab Armor Bead Bath vs. Water Bath

  Bead Bath Water Bath Oil Bath Sand Bath
High Thermal Efficiency Yes Yes Yes No
Microbial/Biofilm Resistant Yes No Yes Yes
Cross-contamination Resistant Yes No No No
Minimal Cleaning Yes No No Yes
No Refilling Yes No No Yes
Rack & Accessory Free Yes No No Yes
Angled Incubation Possible Yes No No Yes
Constant Volume Yes No Yes Yes
Non-Corrosive Yes No No Yes
Broad Temperature Range (-80 to 180C) Yes No Yes Yes
Non-water tight Vessel Compatibility Yes No No Yes
No Evaporation (Instrument Burn-Out Protection) Yes No Yes Yes
Always On (No Warm Up) Yes No No Yes
Mobile or Field Use Compatible Yes No No No
Non-combustible Yes Yes No Yes

 

 

Copyright © 2008-2023 Across International. All rights reserved.