SKU
RTP1200

RTP1200 Fast Sintering Furnace With Halogen Light (Call for Quote)

Price $0.00

CUSTOMIZE YOUR PRODUCT

Wishlist

Please call us for the price (Quote), thank you.

 

 



RTP1200 furnaces (Rapid Temperature Process) with Halogen light feature a chamber with Mitsubishi (Japan) high-quality grade 1900 alumina fiber insulation and 12 pcs Halogen light tubes. A dual-wall steel housing helps minimize heat loss to exterior surface.

 

Furnace operation is controlled by 50 50-segment Eurotherm (UK) digital controller with a built-in communication port, allowing the user to connect to a PC for remote control and monitoring of the furnace.

 

 

Safety

  • Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller's manual) or when the thermocouple is broken or malfunctions.
  • Power failure protection resumes furnace operation right after the point of failure when power is reestablished.
  • Limit switch turns off furnace once top is open.

 

Warning! NEVER fill furnace with explosive gases, including Hydrogen, Carbon Monoxide and Methane.

 

Specifications

Specifications

Power Input 208-240 AC, 50/60 Hz single phase, 12 KW Max.
Heating Elements 12 pcs Halogen light tube
Heating Zone 10" length with 4" constant temperature zone within +/-5ºC uniformity
Working Temperature 600ºC – 700 ºC Max for Continuous
1100ºC Max. for < 10 minutes
1000ºC Max. for < 20 minutes
800ºC Max. for < 120 minutes
Max. Heating Rate 50ºC/sec
Cooling Rate Max. Cooling: 60ºC/min (Under vacuum: 200 m-torr), 117ºC/min (under atmospheric pressure)

Lowest Cooling: 10 ºC / minute
Thermocouple K type
Temperature Controller Eurotherm 3504 • 50 segments programmer (ramp and dwelling)
• +/- 1 ºC temperature control accuracy
• PC communication port
Quartz Tube Dia 4 inch × 23-inch length
Dimensions 40 × 20 × 30(L× W × H)
Standard Packages

 

Part description    

 

   

  Quantity  

 

 

Part image 

 

RTP1200 Fast Sintering Furnace With Halogen Light  1 pc
 Quartz tube  1 pc

Flange Set  1 set

Sample Holder 1 set

 

 Analog flow meter 1 pc  
 Stainless steel hook 1 pc

Quartz Furnace Plug

2

 

Alumina crucible 1

 Thermal gloves 1 pair

K Type thermocouples 1 pc

COM to USB Connector Optional 1 set

 Manual 1 pc

Overview

Please call us for the price (Quote), thank you.

 

 



RTP1200 furnaces (Rapid Temperature Process) with Halogen light feature a chamber with Mitsubishi (Japan) high-quality grade 1900 alumina fiber insulation and 12 pcs Halogen light tubes. A dual-wall steel housing helps minimize heat loss to exterior surface.

 

Furnace operation is controlled by 50 50-segment Eurotherm (UK) digital controller with a built-in communication port, allowing the user to connect to a PC for remote control and monitoring of the furnace.

 

 

Safety

  • Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller's manual) or when the thermocouple is broken or malfunctions.
  • Power failure protection resumes furnace operation right after the point of failure when power is reestablished.
  • Limit switch turns off furnace once top is open.

 

Warning! NEVER fill furnace with explosive gases, including Hydrogen, Carbon Monoxide and Methane.

 

Copyright © 2008-2023 Across International. All rights reserved.