Ai 10°C to 25°C 33L/Min 35L Capacity Recirculating Chiller

SKU
WAC-4
Price: $5,990.00
Add to wishlist

Digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters (see models below). These chillers have built-in stainless steel tank, water pump and tubing for durability and rust-free operations. Water manifold included for immediate use.



Specifications

Specifications

 

 Model
 WAC-4
 Controller  Digital micro-chip controlled with LCD screen and fluid level display
 Input power  480VAC 60Hz three-phase (3PH) 3.75kW
 Nominal cooling capacity  10366 kcal per hour
 Nominal cooling capacity is according to:
        Inlet chilled fluid temperature: 12°C
        Outlet chilled fluid temperature: 7°C
        Inlet cooling air temperature: 30°C
        Outlet cooling air temperature: 35°C
 Compressor
 Make: Danfoss (UL Listed)
 Power: 460V 3-60Hz 8A 3750 watts, LR 25A, thermally protected
 Refrigerant: R407C (2,400g)
 PS: 22.6 bar, TS max: 50°C, TS min: -35°C
 Number of compressors installed: one
 Water pump
 Make: LX (CMF2-50T-A-W-G-BABE)
 Power: 480V 60Hz 3-PH 550 watts 2.5/Y1.4A 3450 rpm IP55
 Max liquid temperature: 70°C
 Pumping speed: 33L per minute
 Max pressure: 10 bar. H(max): 64m, H(n): 51m
 Reservoir capacity  35L
 Recommended coolant  Distilled water
 Cooling fan  Make: Weiguang (YWF4D-350S-102/34-G)
 Power: 480V 60Hz 80/150 watts 0.27A 1640 rpm
 Number of fans installed: two
 Flow rate: 142,000 cu ft per hour
 Temperature accuracy  +/- 2 °C
 Water inlet & outlet on chiller
 1.5" inch Tri-Clamp
 Water manifold

 Inlet: 1.5” inch Tri-clamp, manifold: one 1” inch, two 8mm quick connect with ball valve

 Unit/shipping weight  375 Lb / 485 Lb
 Unit/shipping dimensions  41 x 22 x 54" / 50 x 25 x 61" (DxWxH)
 Safety  Over current, compressor delay start, water pump
 over load, built-in fuse, over-voltage and under-
 voltage, abnormal operations, phase protection and
 Working environment  Temperature range of chilled fluid: 5°C - 35°C. Temperature
 difference of chilled fluid between inlet and outlet: 3°C - 8°C
.
 It is better to use the chiller while the ambient temperature is
 at or below 35°C
 Recommended to use with
 these induction heaters
 (result may vary on
 different applications)
 High frequency 10kW, 20kW, 30kW
 Mid frequency 25kW, 35kW
 Low frequency 25kW, 35kW
 CE compliant  Yes
Standard Packages
Standard package

Item
Quantity Image
 WAC-4 recirculating chiller
 1 pc

 Water manifold
2 pcs
 
 KF40 flange 2 pcs  
 Users manual
1 pc
 
Copyright © 2008-2021 Across International. All rights reserved.