Industrial filtration solution, Buchner type, mounted on a trolley. Ideal for filtering lipids, and waxes from the winterization process as well as solids, carbon, clay, etc... Filter in minutes what you would normally do in hours. Our trolleys are a leader in depth filtration technology, being the easiest to use, least expensive to operate, and least capital-intensive filtration solution at scale.
Looking for an industrial filtration solution that can filter slurries, acids, bases, and more in minutes? Look no further than the SCF Filter Trolley. This Buchner-type filtration equipment is mounted on a trolley, making it highly mobile and easy to move around your facility.
With a diameter of 800mm and a capacity of about 62 gallons, this filter trolley will meet your filtration needs. It is built with FDA food-grade polypropylene and is depth filtration capable, making it safe to use with most organic solvents and acids.
The trolley comes equipped with a Debem Polypropylene case AODD pump, featuring PTFE Diaphragms, and is ATEX Zone 2 and C1D2 compliant, making it explosion-proof and safe for use in hazardous locations. No vacuum pump is required, and the pump can handle acids, bases, and alcohols with ease. This pneumatic pump does not pose a risk of sparks, eliminating any explosion risk.
With a low operating cost, this filter trolley is the easiest to use and least expensive to operate, providing you with a huge filtering capacity and leak-proof filter paper installation with a reusable gasket. It is highly mobile, mounted on casters, and easy to clean and disassemble.
So if you're looking for an industrial filtration solution that is tough, durable, and almost indestructible, the SCF Filter Trolley is the perfect choice for you. It is made in Italy and comes with an option for FDA food-grade pumps as an upgrade. Order now and experience the benefits of depth filtration technology!
CE certified, FDA compliant
Holds 20 liters of crude per batch, 10 gallons of 10:1 Solvent: Crude, 5+ liters of lipids.
Specifications:
- Diameter: 800mm (31.5 inches)
- Capacity: About 62 Gallons Total
- Height Minimum: 550mm
- Shell Material: Polypropylene
- AODD Pump: Debem 1” Polypropylene case, PTFE Diaphragms, ATEX Zone 2, C1D2 Compliant.
- Compressed Air Pressure: From 4 to 8 bar
- Absolute Pressure Minimum: 0.2 bar
- Compressed Air Pressure Consumption: From 150 to 420 l/min (14.8 CFM)
- Recommended Compressor (Not Included): 5HP 17.9 CFM at 100 PSI
- Box dimensions, 95 x 125 x 120cm, Gross Weight 120Kg.
- Made in Italy
Benefits:
- Built with FDA Food Grade Polypropylene
- Depth Filtration Capable
- Will not crack under extreme cold
- Safe to use with almost all organic solvents, except Pentane.
- High R-Value (Insulating Materials)
- Huge filtering capacity
- No Vacuum Pump required
- C1D2 Compliant. Explosion Proof. No source of sparks. No explosion risk.
- Easy to clean and disassemble
- Inexpensive filter paper
- Leak-proof filter paper installation with reusable gasket
- Filter slurries, solids, liquids, powders, etc...
- The included lid helps minimize evaporation
- Properly balanced, won’t flip over
- Highly mobile, mounted on casters
FDA Food Grade Pumps are available as an upgrade.
Where it excels:
· Filtering out lipids, fats and waxes from crude tinctures high in fats like those from CO2 and BHO/PHO crudes,
· Removing carbon from CIP process,
· Removing biomass particles from centrifuge streams.
· Perfect for small labs.
FEATURES
· CiD1 Compliant Pneumatically powered AODD pump
· Implosion safety valve mounted on casters
· German Polypropylene shell material
· Debem Brand AODD Pump
· Fume Hood Made in Italy
This is a Polypropylene molded plastic filter trolley. This machine is tough, durable, and almost indestructible. PP is impervious to Nitric, Hydrochloric, and similar acids or bases and easily handles Ethanol, Isopropyl, and most other solvents. Our trolley comes with an included diaphragm pump which does the job of active vacuum to filter through the filter paper; no vacuum pump is required. This is a pneumatic pump so there is no risk of sparks. An air compressor is required to supply this machine with compressed air. To operate we place filter paper over a removable grate, then place a seal around the filter paper to prevent leaks. This takes a few minutes to install and even faster to take apart. Add your tincture and begin filtering.
Advantages:
· Operating cost of $0.008-$0.025 per gram of crude.
· Depth Filtration Capable
· Easy to clean and disassemble
· Inexpensive consumables
· Leak-proof filter paper installation with reusable gasket
· High R-Value (Insulating Materials)
· Built with FDA Food Grade Polypropylene
· Will not crack under extreme cold
· ATEX Zone 2, C1D1 Compliant
· Large filtering reservoir
Optional Features:
· FDA Sanitary AODD Pumps
· Stainless Steel Sanitary Plumbing
· Steel Lid with Sanitary Fittings
· -40F Environment Upgrade