For Lab Furnaces
|
|
|
| 1/4" Premium Rubber Vacuum Tubing | Alumina Ceramic Process Tubes (2.36" to 4" OD, Open Both Ends) | Dual-Stage Vacuum Pump Exhaust Oil/Fume Filter |
Fits our VO-16020p and VO-16050p series vacuum drying ovens (item# VH.3F) | Maximum working temperature: 1750°C / 3180°F with alumina > 99.5% | Virtually eliminates oil mist, fumes & organic chemicals, also returns trapped pump oil back to the pump and makes pump quieter to run (item# SMF-010) |
$9.99 | $0.00 | $149.00 |
|
|
|
| KF25 Flexible Premium Stainless Steel Vacuum Bellow | Alumina Ceramic Lid (1" to 6" Diameter) | Alumina Thermal Plate 10x7x0.3" (LxWxH) for Muffle Furnaces |
Fits our VO-16020v and VO-16050v series vacuum drying ovens (item# KF25.VF) | Maximum working temperature: 1750°C / 3180°F | Can be used with alumina blocks to form racks inside muffle furnaces, maximium temperature 1750°C (3180°F) |
$290.00 | $0.00 | $89.00 |
|
|
|
| Alumina Ceramic Thermal Tube Blocks for Tubes OD 40mm to 120mm | Shimaden FP93 Temperature Controller with 40-Segement Ramp PID | 9.5 CFM Dual-Stage Sliding-Vane Vacuum Pump w/ Dual-Stage Filter |
These refractory blocks must be placed in front of vacuum sealing flanges to minimize heat damage to the silicon sealing gasket. | Fits all our tube and muffle furnaces (item# FC.FP93) | 0.00375 Torr, 110v 60Hz (item# 2TW4C) |
$0.00 | $450.00 | $1,199.00 |
|
|
|
| High Vacuum Pump Oil (1 Quart) for Mechanical Vacuum Pumps | K Type 11" Thermocouple with Ceramic Sheath (Item# TCK) | S Type 9.8" Thermocouple with Ceramic Sheath (Item# TCS) |
General use for laboratory mechanical pumps. For rapid pumping with low ultimate pressure (item# VO1Q) | Fits our 1100°C and 1200°C tube and muffle furnaces | Fits our 1300°C and 1400°C tube and muffle furnaces |
$17.00 | $190.00 | $690.00 |
|
|
|
|
| B Type 9.8" Thermocouple with Ceramic Sheath (Item# TCB) | Stainless Steel Crucible Tongs 18 1/4" in Length | Compact Gas Flow Meter for Across International Lab Furnaces |
Fits our 1600°C and 1700°C tube and muffle furnaces | Solid steel construction for durability and long time use. (Item# CTS1) | Compact and easy to setup with 2 st. st. valves |
$790.00 | $49.00 | $99.00 |
|
|
|
| NEMA 6-20P 250 Volt 20 Amp 3-Prong Stright Blade Plug | NEMA L6-30P 250 Volt 30 Amp Twist-Lock Plug | AC Contactor for Across International Split Tube Furnaces |
Suggested for our corresponding TF, STF, VTF, CF and GCF series furnaces | Suggested for our corresponding TF, STF, VTF, CF and GCF series furnaces | Fits our STF and VTF series split tube furnaces |
$34.00 | $39.00 | $98.00 |
|
| |
| Thermal Gloves for High Temperature Operation | High Temperature Silicon Sealing O-rings (2" to 6") | |
Great protection for operation with our tube and muffle furnaces | High Temperature Silicone Sealing O-rings for Furnace Tubes (for 1" to 6" OD Tubes) | |
$39.00 | $0.00 | |
.jpg){kind=small}
