SKU
E2M28

Edwards E2M28 21 CFM Dual-Stage High Capacity Vacuum Pump

Price $8,653.00

CUSTOMIZE YOUR PRODUCT

Wishlist

Brand new Edwards E2M28 high capacity vacuum pump with one year manufacturer warranty from Edwards. E2M28 replaces the discontinued E2M30, click links below for more details. Free KF25 flexible stainless steel bellow (3.3 ft), clamps and centering rings set ($219 value) included. Technical support and one year warranty, covered by Edwards.

Overview

The EM range of oil-sealed rotary pumps - renowned for its high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour - has become the industry standard laboratory and light industrialapplications. The E2M28 pump is a two-stage, direct drive, sliding vane pump. The pump is oil sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four-pole) motor.

Supplied with: Ultragrade 19 oil, NW25 O-ring and centering ring, lifting plate. Fomblin must be purchased separately for PFPE pumps.


Technology

The motor is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has two oil drain-plugs to allow either gravity oil drain or pressure oil drain.

 


Applications

  • Analytical instruments - LCMS
  • Automotive
  • Beam lines and high energy physics
  • Centrifuges, ultra-high speed
  • Coating
  • Cryogenics
  • Degassing/curing - oil, epoxy resin
  • Distillation/extraction/filtration
  • Freeze drying
  • Furnaces
  • Gas bottle filling/emptying
  • Gel drying
  • Glove boxes, ovens
  • Laboratory bench top vacuum
  • Lasers, gas recovery and re-circulation
  • Leak detectors, Helium
  • Load locks and transfer chambers
  • Refrigeration manufacture
  • Rotary, centrifugal evaporators
  • Solvent recovery
  • Surface science instruments
  • Turbomolecular backing pumps

 

 

Specifications


Specifications

 

 Model  E2M28 (replacing the old E2M30, click here for more details)
 Vacuum pump type  Dual stage rotary vane
 Power
 110V 50/60Hz 1-PH 8.2A or 220V 50/60Hz 1-PH 4.1A (switchable)
 Power connection  US standard 3-prong plug (NEMA 5-15P)
 Motor power at 50Hz
 750 watts
 Motor power at 60Hz  900 watts
 Peak pumping speed  21 CFM at 60Hz
 Ultimate vacuum without gas ballast  0.75 micron/millitorr
 Ultimate vacuum with gas ballast  11 micron/millitorr
 Unit dimensions (WxDxH) 
 23 x 6.75 x 11"
 Shipping dimensions (WxDxH)
 31 x 11.5 x 19"
 Max water vapor inlet pressure

 22.5 torr (30 mbar)

 Max allowed pressure at outlet

 0.5 bar gauge/7 psig

 Max water vapor capacity

 700 grams/hour

 Operating temperature range

 54°F to 104°F (12°C to 40°C)

 Oil capacity
 Minimum 1.4 quart (1.3 L), maximum 1.6 quart (1.5 L)
 Oil type
 Ultragrade 19
 Nominal rotation speed
 1400/1720 rpm
 Noise level
 57 dB(A)
 Inlet connection
 NW25/KF25
 Outlet connection
 Nozzle 15mm external removable from 3/4 in BSP tapped hole
 Unit weight
 100 Lbs
 Shipping weight  120 Lbs
 Users manual in English  Click here to download
 Certification  CE, UL
Standard Packages

Standard package

 

 Part description

 Quantity

Part image

 Edwards E2M28 21 CFM dual stage vacuum pump
1 pc

 KF25 stainless steel vacuum bellow (3 ft)
1 pc

 KF25 wing nut flange quick clamp
 2 pcs

 KF25 flange centering ring
 2 pcs

Packing Process Sheet

(list of materials in packaging on receipt paper)

1 pc

 110V stardard 3-prong US power cord
1 pc
 Edwards ultra grade 19 vacuum pump oil  2 pcs
 Users manual in a CD
1 pc

Fitting Pack (Edward PN: A37301032)

Centering ring (KF25) qty 1, Female connection qty 4x 2x red, 2x blue): 5x 1.5mm (red) 1.5 x 2.5mm (blue) [Description: Shrouded receptacle red sleeve .25 inches in length to suit cable from .5 to 1.5 mm (Blue). Shrouded receptacle blue sleeve .25 inches in length to suit cable from 1.5 x 2.5mm], Ring terminal for M4 screw qty 2 (1x red and 1x blue), and nitrile o-ring qty 1(28mmIDx 5mm CS)

1 pc

Overview

Brand new Edwards E2M28 high capacity vacuum pump with one year manufacturer warranty from Edwards. E2M28 replaces the discontinued E2M30, click links below for more details. Free KF25 flexible stainless steel bellow (3.3 ft), clamps and centering rings set ($219 value) included. Technical support and one year warranty, covered by Edwards.

Overview

The EM range of oil-sealed rotary pumps - renowned for its high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour - has become the industry standard laboratory and light industrialapplications. The E2M28 pump is a two-stage, direct drive, sliding vane pump. The pump is oil sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four-pole) motor.

Supplied with: Ultragrade 19 oil, NW25 O-ring and centering ring, lifting plate. Fomblin must be purchased separately for PFPE pumps.


Technology

The motor is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.

An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.

You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has two oil drain-plugs to allow either gravity oil drain or pressure oil drain.

 


Applications

  • Analytical instruments - LCMS
  • Automotive
  • Beam lines and high energy physics
  • Centrifuges, ultra-high speed
  • Coating
  • Cryogenics
  • Degassing/curing - oil, epoxy resin
  • Distillation/extraction/filtration
  • Freeze drying
  • Furnaces
  • Gas bottle filling/emptying
  • Gel drying
  • Glove boxes, ovens
  • Laboratory bench top vacuum
  • Lasers, gas recovery and re-circulation
  • Leak detectors, Helium
  • Load locks and transfer chambers
  • Refrigeration manufacture
  • Rotary, centrifugal evaporators
  • Solvent recovery
  • Surface science instruments
  • Turbomolecular backing pumps

 

 

Features

Features and Benefits
  • The pump is designed for reliable, long-term operation.
  • Thermal overload device prevents overheating (single phase only).
  • The pump is a free-standing unit.
  • The drive is provided through a flexible coupling by a single-phase or three-phase (four pole) motor.
  • The motors are totally enclosed and are cooled by the motor-cooling fan.
  • Easy to use controls.
  • Pressure die cast oil box with integral oil seals prevents oil leaks.
  • Gas ballast valve for large water vapour handling capacity.
  • Externally approved to EN61010, CSA, C22.2 and UL61010 standards
  • Oil distribution valve.
  • Pumping chambers are air-tight.
  • Oil sight-glass, two oil drain-plugs, inlet-port and outlet nozzle all fitted as standard.
  • One year warranty, as well as technical support from Edwards.
Copyright © 2008-2023 Across International. All rights reserved.